How to use and maintain rivet guns

Riveting can adapt to the connection between various complex metal and non-metal materials, and is an indispensable tool for vehicle body repair.

Riveting technology, as a method of connecting metal structures, is suitable for rivet connections, part flipping, permanent connections, etc. Widely used in industries such as hardware tools, aircraft manufacturing and maintenance, precision machinery, and automotive manufacturing. A riveting gun is a type of riveting tool used in riveting.

At present, there are various types of rivet guns at home and abroad, which can be divided into piercing rivet guns, radial rivet guns, pendulum rivet guns, hydraulic rivet guns, etc. According to the riveting principle. How to use a riveting gun correctly? When riveting with a riveting gun, first insert the rivet assembly into the through-hole of the connector, and then use the riveting tool to break the protruding rivet rod, and the riveting is successful.

Whether it is a single or double wicker nail gun, the first thing to consider is the diameter of the wicker nail to be connected. The common diameters of open wicker nails are 2.4, 3.0, 3.2, 4.0, 4.8, 5.0, 6.0, and 6.4.

2. Then select the corresponding nozzle from the accessories of the nail gun. Generally speaking, these specifications are engraved on the nozzle. This is important, otherwise it may lead to poor pulling effect or jamming.

3. Fully open the handle of the rivet gun and insert the thin end of the rivet into the nozzle of the rivet gun.

4. Whether it is a single riveting gun or a double riveting gun, rivets must be inserted into the holes where the two handles of each pair of riveting guns need to be spliced.

5. Point the wicker nail towards it and press the two handles one or more times until the core of the wicker nail breaks.

Willow spears are generally not used to collect broken nails. Double willow spears usually have a nail bottle. After being pulled out, the broken nail will fall into the nail collection bottle. When the collection is almost full, take out the nail collection bottle, discard the nails, and reinstall.

After understanding the instructions for using the nail gun, in the future, when using the nail gun, be sure not to overload it, work within the specified performance parameters, pull the trigger to pull the nail gun, and aim the gun head at yourself or others. I hope everyone pays attention.

Notes on the use of manual nail guns

Before starting work, inject a small amount of lubricating oil into the air inlet to ensure the working performance and service life of the rivet gun.

2. Maintain the prescribed intake pressure. If the intake pressure is too low, the power of the riveting hammer will decrease, which not only leads to low riveting efficiency, but also causes the rivet head to crack due to excessive hammering.

3. The button can only be pressed after the rivet on the punch is tightened. Otherwise, the reciprocating motion of the piston consumes some energy, and the piston will collide with the casing, causing damage to the riveting gun.

4. Use protective springs to firmly connect the punch to the gun body to prevent the punch from flying out and damaging personnel or products.

5. Hold the handle with your right hand, press the button with your index finger to start the riveting gun, and use the button to adjust the compressed air to ensure smooth operation of the riveting gun. At the beginning of riveting, due to the long rivet rod, the gap between the rivet rod and the rivet hole is large, and the rivet rod is prone to bending during riveting. So lightly pressing the button can reduce the power of the rivet gun. When the rivet shaft fills the rivet hole, the rivet force will increase and the pier head will quickly form. As the pier head approaches completion, the button will gradually release to prevent it from being hit too low.

6. The tail of the punch should be prepared according to different rivet gun models and cannot be used in series to avoid damaging parts and reducing efficiency.

7. During use, do not take photos randomly to avoid damaging the parts.

The above is a complete introduction to the usage method and precautions of the small six nail gun on the opposite side. I believe everyone knows more or less the usage of nail guns. I hope Bian Xiao's introduction can be helpful to everyone. Please like those you like.